- Integrated fully differential ADC driver with signal scaling
- Wide input common-mode voltage range
- High common-mode rejection
- Single-ended to differential conversion
- Pin selectable input range with overrange
- Input ranges with 4.096 V REFBUF: ±10 V, ±5 V, ±4.096 V, ±2.5 V, and ±1.5 V
- Gain/attenuation options: 0.37, 0.73, 0.87, 1.38, and 2.25
- Critical passive components
- 0.005% precision matched resistor array for FDA
- 9 mm × 9 mm, 0.8 mm pitch, 100-ball CSP_BGA package
- 2.5× footprint reduction vs. discrete solution
- Low power, dynamic power scaling, power-down mode
- 143 mW typical at 15 MSPS
- Throughput: 15 MSPS, no pipeline delay
- INL error: ±3.1 ppm typical, ±6.2 ppm maximum
- (Gain = 0.73, gain = 0.87, gain = 1.38, gain = 2.25)
- SINAD: 90.4 dB typical at 20 kHz (gain = 0.73)
- THD: −117 dB at 1 kHz, −110 dB at 100 kHz (gain = 0.73)
- Gain error: ±0.005%FS typical
- Gain error drift: ±0.13 ppm/°C typical
- On-board reference buffer with VCMO generation
- Serial LVDS interface
- Wide operating temperature range: −40°C to +85°C